SOMFY WT Wall-Mounted Keyswitch

This wired keyswitch by SOMFY includes 3 keys, allowing you to control a mechanism (e.g., a roller shutter, awning, etc.). It is waterproof and weather-resistant, designed for outdoor installation on any point on the wall without requiring pre-installation. With an elegant and modern design featuring curves for discreet integration into any space. By turning and holding the key to the right, the motor moves in one direction. Conversely, turning it to the left, the motor moves in the opposite direction.

WT – Mixed Operation

In the simple WT model, it is possible to set the switch internally for its operating mode (FP: Fixed Position or MP: Manual Position). In other words, the user is given the possibility to define whether he should hold the key to the right or to the left or if, by leaving it, it will remain there until the motor reaches its final position (end limit) or until the user turns the key again to the middle.

WT MP – Manual Position

In the MP model, the user must hold the key right or left until the motor reaches its final position (end limit), otherwise once the user releases the key it will return to its original position and the movement of the mechanism will automatically stop.

For safety reasons, the FP version is not recommended for use with mechanisms without terminal limits.

Technical Specifications

• Connections: 1
• Cables: 0.75-1.5mm
• Protection Index: IP54
• Power Supply AC: 12-24V
• Power Supply DC: 120-240V 50/60Hz
• Short-Circuit Protection: 16A gG
• Technology: WT (Wired Technology)
• Operating Temperature: -20°C to +60°C
• Dimensions: 76x74x45mm
• Weight: 0.35gr

Application

• Roller Shutters
• Awnings
• Roller Curtains
• External Blinds

Availability

The product is usually Available. But as there may be a shortage due to high demand or delay in imports, it is better to contact us for availability and expected delivery time.

The warranty for the motors is valid only when operated by SOMFY approved switches